Description

Strip-Brite 228 is a phenolic-type paint remover formulated for removal of difficult paints and organic coatings from aviation parts and engine components. Strip-Brite 228 has thin viscosity designed for dip tank use. The wax seal prevents evaporation more effectively than water; it also increases the usable stripper content to 99 %. Most coatings are removed in 20 minutes, including some difficult primers. It is safe on all metals and will not cause hydrogen embrittlement on high strength steel as per MIL-R-81294 spec. Strip-Brite 228 is chemically neutral, stable for extended periods and easy to rinse with low-pressure cold water. It is an ideal tool for aviation engine rebuilding or aircraft stripping operations.

Directions

• Use full strength at room temperature.

• Rack parts in a basket and submerge in the stripper for sufficient time to loosen the paint or carbon.

• Remove parts from the tank and wash with warm water.

• Keep the tank lid closed to minimise evaporation.

• Periodically remove paint chips in the tank using a strainer.

Caution

Strip-Brite 228 contains methylene chloride and phenol. Use only in well ventilated areas. Avoid ingestion, prolonged inhalation, and contact with skin, eyes and clothing. Use a face shield and solvent resistant clothing when handling or working with this product. Plexiglas and rubber should be protected from contact with Strip-Brite 228. Other surface materials may also be incompatible with this stripper; test a small area to ensure proper results.