Description
Strip-Brite 275 is an ultra-high viscosity environmentally friendly paint remover formulated to strip tough coatings from most surfaces. A pH neutral, thixotropic gel that clings to vertical surfaces as well as the underside of horizontal, 275 is extremely effective on multiple coats of paint. Strip-Brite 275 is non-flammable, has minimal odour, and is formulated with a superior detergent system that allows for easy rinsing.
Features
Conforms to Boeing D6-17487, Revision R (excludes magnesium and cadmium).
Conforms to MIL-R-81294 hydrogen embrittlement standards for high strength steel.
Contains no chlorinated solvents, acids, alkalis, phenolics, or chromates.
Removes multiple coats of paint with one application.
Non-flammable, pH neutral, low odour, rinses easily.
Minimum shelf-life of 24 months.
Low aquatic toxicity and high biodegradability.
Directions
Strip-Brite 275 should be used full strength at 65 - 85 °F.
Apply a thick and even coat with a non-atomizing spray or brush.
Allow sufficient time for paint to loosen (4 to 16 hours) and then agitate with a stiff bristle brush.
Check if paint has been completely removed; if not, apply an additional coat of Strip-Brite 275 and allow more time for stripping.
When stripping is complete, wash with cold or warm water at 50 psi or higher.
Strip-Brite 275 contains benzyl alcohol and hydrogen peroxide. Avoid ingestion, inhalation of vapour, and contact with skin, eyes and clothing. Use a face shield and solvent resistant clothing when handling or working with this product. Some surface materials may be incompatible with this stripper; test a small area to ensure proper results.