Description
Strip-Brite 414 is an environmentally friendly alkaline paint remover formulated to remove tough coatings from aluminum and steel.
Safe for personnel and easy to use. Will not cause chemical or thermal burns to skin. Low aquatic toxicity and high biodegradability - contains no chlorinated solvents, NMP, acids, phenolics, or chromates.
Low odour, low evaporation and low fuming. Removes multiple coats of paint with one immersion, and stripped parts easily rinse clean with warm or hot water. With proper tank maintenance, Strip-Brite 414 will last indefinitely. A must have product for aluminum wheel repair shops, electroplating, and all industrial paint stripping applications.
Directions
Use full strength at 20-35 C in a plastic or stainless steel tank.
Rack parts in a basket and submerge in the stripper for sufficient time to loosen the paint.
Remove parts from the tank and rinse with water.
When not in use, keep tank lid tightly closed. Use in conjunction with our Oil Blanket product to minimize evaporation.
For stubborn parts, Strip-Brite 414 can be GENTLY heated to 35 C. Exterior electric heat only - avoid contact with open flames.
Caution
Avoid ingestion, inhalation of vapour, and contact with skin, eyes and clothing. Use gloves, goggles, a face shield and solvent resistant clothing when handling or working with this product. Plexiglass, composite materials and rubber should be protected from contact with Strip-Brite 414. Other surface materials, metals and alloys may also be incompatible with this stripper; always test a small area prior to widespread application to ensure proper results. Liquid and vapour may be flammable - keep away from open flame and elevated temperatures.